US 2700

Woven Geotextile

US 2700 is a woven geotextile made of 100% polypropylene monofilament and fibrillated yarns. This product has high tensile strength and modulus and is used for reinforcement over soft soils. US 2700 meets the following M.A.R.V. values except where noted:

Without a Geotextile Separator With a Geotextile Separator
PROPERTY TEST METHOD ENGLISH METRIC
Weight - Typical ASTM D-5261 6.9 oz/sy 234 g/sm
Tensile Strength ASTM D-4632 350 x 350 lbs 1,558 x 1,558 N
Elongation @ Break ASTM D-4632 20 x 15% 20 x 15%
Wide Width Tensile ASTM D-4595 3,000 x 3,000 lbs/ft (250 x 250 lbs/in) 43.8 x 43.8 kN/m
CBR Puncture ASTM D-6241 1,000 lbs 4,450 N
Trapezoidal Tear ASTM D-4533 120 x 120 lbs 530 x 530 N
Apparent Opening Size ASTM D-4751 35 US Sieve 0.500 mm
Permittivity ASTM D-4491 0.150 Sec-1 0.150 Sec-1
Water Flow Rate ASTM D-4491 16 g/min/sf 660 l/min/sm
UV Resistance @ 500 Hours ASTM D-4355 80% 80%
ROLL SIZE AREA WEIGHT
15' x 300' 500 sys 231 lbs

The above information is to the best of our knowledge accurate, but it is not intended to be considered a guarantee. Any implied warranty for a particular use or purpose is excluded. If the product does not meet the above properties, and notice is given to US Fabrics, Inc., the product will be replaced or refunded (1/2012).