US 300NW

  • The page you requested does not exist. For your convenience, a search was performed using the query media products US250 pdf.
  • The page you requested does not exist. For your convenience, a search was performed using the query media products US2700 pdf.

Nonwoven Geotextile

US 300NW is a nonwoven needlepunched geotextile made of 100% polypropylene staple filaments. This product can be used under riprap for erosion control; for separation in road and railroad applications; and will act as a cushion in geomembrane applications. US 300NW meets the following M.A.R.V. values except where noted:

Riprap Stabilization/Separation Railroad Stabilization/Separation
PROPERTY TEST METHOD ENGLISH METRIC
Weight - Typical ASTM D-5261 12 oz/sy 407 g/sm
Tensile Strength ASTM D-4632 300 lbs 1,335 N
Elongation @ Break ASTM D-4632 50% 50%
Mullen Burst ASTM D-3786 580 psi 3,999 kPa
Puncture Strength ASTM D-4833 180 lbs 801 N
CBR Puncture ASTM D-6241 850 lbs 3,782 N
Trapezoidal Tear ASTM D-4533 115 lbs 511 N
Apparent Opening Size ASTM D-4751 100 US Sieve 0.150 mm
Permittivity ASTM D-4491 1.00 Sec-1 1.00 Sec-1
Water Flow Rate ASTM D-4491 75 g/min/sf 3,055 l/min/sm
UV Resistance @ 500 Hours ASTM D-4355 70% 70%
ROLL SIZE AREA WEIGHT
12.5' x 360' 500 sys 375 lbs
15' x 300' 500 sys 375 lbs

The above information is to the best of our knowledge accurate, but it is not intended to be considered a guarantee. Any implied warranty for a particular use or purpose is excluded. If the product does not meet the above properties, and notice is given to US Fabrics, Inc., the product will be replaced or refunded (1/2012).