US 4800/30

Woven Geotextile

US 4800/30 is a woven geotextile made of 100% polypropylene yarns that has high tensile strength and modulus and is used for reinforcement over soft soils. US 4800/30 has a higher flow rate than our standard US 4800 product. US 4800/30 meets the following M.A.R.V. values except where noted:

Without a Geotextile Separator With a Geotextile Separator
PROPERTY TEST METHOD ENGLISH METRIC
Weight - Typical ASTM D-5261 14.0 oz/sy 475 g/sm
Tensile Strength ASTM D-4632 475 x 440 lbs 2,114 x 1,958 N
Elongation @ Break ASTM D-4632 12 x 6% 12 x 6%
Wide Width Tensile ASTM D-4595 4,800 x 4,800 lbs/ft (400 x 400 lbs/in) 70 x 70 kN/m
Wide Width Tensile @ 5% Strain ASTM D-4595 2,400 x 2,700 lbs/ft (200 x 225 lbs/in) 35 x 39.4 kN/m
Wide Width Elongation ASTM D-4595 9 x 9% 9 x 9%
Mullen Burst ASTM D-3786 1,200 psi 8,270 kPa
Puncture Strength ASTM D-4833 200 lbs 890 N
Trapezoidal Tear ASTM D-4533 180 x 180 lbs 801 x 801 N
Apparent Opening Size ASTM D-4751 30 US Sieve 0.60 mm
Permittivity ASTM D-4491 .40 Sec-1 .40 Sec-1
Water Flow Rate ASTM D-4491 30 g/min/sf 1,222 l/min/sm
UV Resistance @ 500 Hours ASTM D-4355 80% 80%
ROLL SIZE AREA WEIGHT
15' x 300' 500 sys 475 lbs

The above information is to the best of our knowledge accurate, but it is not intended to be considered a guarantee. Any implied warranty for a particular use or purpose is excluded. If the product does not meet the above properties, and notice is given to US Fabrics, Inc., the product will be replaced or refunded (1/2012).