US 6200

Woven Geotextile

A woven geotextile made of 100% polypropylene yarns that has high tensile strength and modulus and is used for reinforcement over soft soils. US 6200 meets the following M.A.R.V. values except where noted:

Without a separator With a separator
PROPERTY TEST METHOD ENGLISH METRIC
Weight - Typical ASTM D-5261 14.75 oz/sy 500 g/sm
Tensile Strength ASTM D-4632 700 x 700 lbs 3,120 x 3,120 N
Elongation @ Break ASTM D-4632 20 x 15% 20 x 15%
Wide Width Tensile ASTM D-4595 6,168 x 6,168 lbs/ft (517 x 517 lbs/in) 90 x 90 kN/m
CBR Puncture ASTM D-6241 1,700 lbs 7,565 N
Trapezoidal Tear ASTM D-4533 250 x 250 lbs 1,112 x 1,112 N
Apparent Opening Size ASTM D-4751 80 US Sieve 0.180 mm
Permittivity ASTM D-4491 0.109 Sec-1 0.109 Sec-1
Water Flow Rate ASTM D-4491 9 g/min/sf 368 l/min/sm
UV Resistance @ 500 Hours ASTM D-4355 80% 80%
ROLL SIZE AREA WEIGHT
15' x 300' 500 sys 481 lbs

The above information is to the best of our knowledge accurate, but it is not intended to be considered a guarantee. Any implied warranty for a particular use or purpose is excluded. If the product does not meet the above properties, and notice is given to US Fabrics, Inc., the product will be replaced or refunded (1/2012).