Properties Chart: J-DRain

Property ASTM Test Method Units 200/220 400/420 400/420 XL 700/720 780 990 300 302 1000 GRS
Core Type   Dimple Dimple Dimple Dimple Dimple Dimple Geonet Geonet Geonet Dimple
Core Material   PP PP PP PP PP PP PE PE PE PS3
Thickness D-1777 inches (mm) 0.4 (10.16) 0.4 (10.16) 0.4 (10.16) 0.4 (10.16) 0.4 (10.16) 0.4 (10.16) 0.25 (6.35) 0.25 (6.35) 0.25 (6.35) 1 (25.4)
Compressive Strength D-1621 psf (kNm2) 11,000 (527) 15,000 (718) 16,500 (790) 21,000 (1,005) 21,000 (1,005) 30,000 (1,436) 40,000 (1,915) 40,000 (1,915) 40,000 (1,915) 9,500 (455)
Flow Rate 1(per unit width) D-4716 gal/min/ft (L/min/m) 18 (223) 21 (261) 21 (261) 23 (286) 23 (286) 24 (298) 8.5 (106) 8.5 (106) 8.5 (106) 302 (372)
Geotextile Type   NW (one side) NW (one side) NW (one side) W (one side) NW (one side) W (one side) NW (one side) NW (two sides) NW (two sides 4oz / 6oz) NW Root Resistant Earthtone Barrier
Geotextile Material   PP PP PP PP PP PP PP PP PP PP PP
Grab Tensile Strength D-4632 lbs. (kN) 100 (.45) 100 (.45) 160 (.71) MD 370 (1.65) CD 250 (1.11) 230 (1.02) MD 370 (1.65) CD 250 (1.11) 100 (.45) 100 (.45) 100 (.45) 160 (.71) 100 (.45) MD 54.2 CD 47
Grab Tensile Elongation D-4632 % 60 60 50 MD 16 CD 15 50 MD 16 CD 15 60 60 60 50 60 MD 54 CD 78
Trapezoidal Tear D-4533 lbs. (kN) 45 (.20) 45 (.20) 65 (.29) MD 100 (.45) CD 60 (.27) 85 (.38) MD 100 (.45) CD 60 (.27) 45 (.20) 45 (.20) 45 (.20) 65 (.29) 45 (.20) MD 26.2 CD 19.9
Mullen Burst D-3786 psi (kPa) 210 (1,447) 210 (1,447) 315 (2,168) 450 (3,097) 400 (2,753) 450 (3,097) 210 (1,447) 210 (1,447) 210 (1,447) 315 (2,168) 210 (1,447)  
Puncture Strength D-4833 lbs. (kN) 65 (.30) 65 (.30) 95 (.42) 120 (.53) 130 (.58) 120 (.53) 65 (.30) 65 (.30) 65 (.30) 95 (.42) 65 (.30)
Apparent Opening Size D-4751 U.S. Sieve (mm) 70 (.212) 70 (.212) 70 (.212) 70 (.212) 100 (.150) 70 (.212) 70 (.212) 70 (.212) 70 (.212) 70 (.212) 70 (.212)
Permittivity D-4491 sec - 1 1.9 1.9 1.5 0.28 1.36 0.28 1.9 1.9 1.9 1.5 1.9
Permeability D-4491 cm/sec 0.21 0.21 0.25 0.01 0.31 0.01 0.21 0.21 0.21 0.25 0.21
Flow Rate D-4491 gal/min/ft2 (l/min/m2) 140 (5,740) 140 (5,740) 110 (4,480) 18 (733) 100 (4,073) 18 (733) 140 (5,704) 140 (5,704) 140 (5,704) 110 (4,480) 140 (5,704)
UV Resistance (@ 500 hours) D-4355 % strength retained 70 70 80 90 80 90 70 70 70 80 70
Roll Length   feet 50 50 50 50 50 50 75 75 50 50
Roll Width   feet 4 6.5 8.5 4 6.5 8.5 4 6.5 8.5 4 6.5 8.5 4 6.5 8.5 4 6.5 8.5 4 7 4 7 4 4

1Tested @ 3,600 psf and a Hydraulic Gradient = 1
2Tested @ 3,600 psf and a Hydraulic Gradient = .1
3100% post industrial regrind

LEGEND:
PP = POLYPROPYLENE
PE = POLYETHYLENE
PS = POLYSTYRENE
W = WOVEN
NW = NONWOVEN