State of South Dakota
Department of Transportation Specifications
South Dakota DOT specifies test method ASTM-D4595 Wide Width Tensile for nonwoven geotextiles. The industry standard for geotextiles is ASTM-D4632 Tensile Strength. The products listed below are our best guesses. Below are US Fabric's geotextile products that meet the South Dakota DOT geotextile specification, listed by their application.
Click on the red product name for a data sheet.
|831.1 A||Drainage Fabric Type A||US 100NW||--||--||--|
|831.1 A||Drainage Fabric Type B||US 205NW||--||--||--|
|831.1 A||Geotextile Separator||US 160NW||US 200||--||--|
|831.1 A||MSE Geotextile Fabric||--||US 315||--||--|
• The above information is to be used only as a guide.
• Products on the above list can change without notice.
• US 205NW is on the SDDOT Approved Products List.