Spec InterpretationWest Virginia
State of West Virginia
Department of Transportation Specifications
December, 2011
WVDOT
West Virginia DOT follows AASHTO M288 as a guideline for their geotextile specifications. The 2001 Supplemental West Virginia DOT spec reads: “Engineering fabric shall meet the applicable requirements of AASHTO M288.” Below are US Fabrics' geotextile products approved for use by West Virginia DOT, listed by their application.
Click on the red product name for a data sheet.
| SPECIFICATION | APPLICATION | NON WOVEN | WOVEN | COMPOSITE | GRID |
|---|---|---|---|---|---|
| 715.11.4 | Subsurface Drainage | US 160NW | -- | -- | -- |
| 715.11.6 | Erosion Control | US 205NW | -- | -- | -- |
| 715.11.8 | Separation | US 160NW | US 250 | -- | -- |
| 715.11.9 | Stabilization | US 205NW | US 315 | -- | -- |
More resources may be found on the web:
State QPL information:
NOTES:
• The above products have been successfully evaluated by WVDOT.
• The above information is to be used only as a guide.
• Products on the above list can change without notice.
Areas Served:
US Fabrics is proud to serve the geotextile needs of the State of West Virginia including:Charleston, Huntington, Parkersburg, Wheeling, Morgantown, Weirton, Fairmont, Beckley, Clarksburg, Martinsburg, and all other areas of West Virginia.