US 230 Aeromodeling Geotextile

Woven Runway Fabric

A 100% polypropylene, woven, monofilament fabric ideal for runway installation for model airplanes.

woven runway fabric
PROPERTY TEST METHOD ENGLISH METRIC
Weight - Typical ASTM D-5261 8 oz/sy 271 g/sm
Tensile Strength ASTM D-4632 400 x 315 lbs 1,780 x 1,402 N
Elongation @ Break ASTM D-4632 15 x 15% 15 x 15%
Wide Width Tensile ASTM D-4595 250 x 230 lbs/in 43.8 x 40.3 kN/m
Puncture Strength ASTM D-4833 150 lbs 668 N
CBR Puncture ASTM D-6241 1,150 lbs 5,118 N
Trapezoidal Tear ASTM D-4533 150 x 165 lbs 668 x 704N
Apparent Opening Size ASTM D-4751 40 US Sieve 0.425 mm
Permittivity ASTM D-4491 0.90 Sec-1 0.90 Sec-1
Water Flow Rate ASTM D-4491 70 g/min/sf 2,852 l/min/sm
Percent Open Area CW-02215 1% 1%
UV Resistance @ 500 Hours ASTM D-4355 90% 90%
ROLL SIZE AREA WEIGHT
15' x 300' 500 sys 265 lbs

The above information is to the best of our knowledge accurate, but it is not intended to be considered a guarantee. Any implied warranty for a particular use or purpose is excluded. If the product does not meet the above properties, and notice is given to US Fabrics, Inc., the product will be replaced or refunded (1/2012).