Contact Us or call (800) 518-2290

Speak to a geotextile expert now!
We answer the phone!

Mirafi Miramesh GT US Fabric Equivalent is Stratamesh

StrataMesh is a geosynthetic reinforcement face wrap for use in temporary or permanent wirefaced slopes and walls, manufactured using high-tenacity polypropylene monofilament yarns and ultraviolet inhibitors to provide UV protection. The yarns are woven into a dimensionally stable, uniform network of apertures providing significant tensile capacity, while promoting vegetation growth. This polypropylene monofilament geogrid is engineered to be both mechanically and chemically durable, in both the harsh construction installation phase and aggressive soil environments. StrataMesh is Green and Black.

MIRAFI® Miramesh GR is composed of green high-tenacity monofilament polypropylene yarns that are woven together to produce an
open mesh geotextile. MIRAFI Miramesh GR is inert to biological degradation and resistant to naturally encountered chemicals, alkalis,
and acids. MIRAFI Miramesh GR Facing Geogrids are used as secondary reinforcement for surficial stability to promote vegetation
growth in MSE structures such as; geosynthetic wrapped faced walls, wire faced walls and steepened slopes. MIRAFI Miramesh GR is
also used as a separation screen layer under permeable pavers and stream channel blocks. Minimum Average Roll Values (MARV)
shown below are based on QC Testing per a defined lot not to exceed 12 months. Testing Frequency follows ASTM D4354, Table 1.
This data for MIRAFI® Miramesh GR is provided for comparison purposes only.

Mirafi Miramesh GT Test Data

Property Test Method English Metric
Ultimate Tensile Strength ASTM D-6637 / ASTM D-4595 1,440 x 1,733 lbs/ft 21 x 25.3 kN/m
Creep Limited Strength ASTM D-5262/D-6992 471 x 566 lbs/ft 6.9 x 8.3 kN/m
(LTDS) Long Term Design Strength GRI GT-7 407 x 490 lbs/ft 5.9 x 7.2 kN/m
UV Resistance @ 500 Hours ASTM D-4355 100 % 100 %
UV Resistance @ 2,000 Hours ASTM G154-98 97 % 97 %
UV Resistance @ 5,000 Hours ASTM D-4355 90 % 90 %
Aperture DimensionsNominal Measured 0.08 x 0.08 inches 2 x 2 mm
The supplied information is provided as a service to our customers under "Descriptive Fair Use" to show the relationship between our products and the listed manufacturer's products. All values are published on the manufacturer's website per the date listed below. Products are compared using the properties and test methods on US Fabrics' published, website data sheets. As such, not all properties and test methods may be included in this comparison. US Fabrics, its website and products are neither endorsed, nor sponsored by, nor affiliated with the listed manufacturers. All products are registered trademarks of said manufacturers. US Fabrics aims to provide information that is accurate, however does not accept responsibility for any errors or omissions in the information provided on this page or incorporated into it by reference. Please refer to the manufacturer's most recent published data or website to verify accuracy.
Need Help Writing Specifications?
Download our free Guide to Better Geotextile Specifying. ** UPDATED 2024 **
An Expert's Manual for Distributors
Download our free Distributor's Manual on Geosynthetics & Geotextiles. This 49 page manual is packed with useful tips and quick reference materials. ** UPDATED 2024 **
Contractor's Application Guide
Download our free Contractor's Guide for the most effective ways to use geosynthentics. ** UPDATED 2024 **